Filter
Top Products
Masterpage:Right
EN 65
Filename [XVC2829US_11Trouble.fm]
Page 65 8 December 2004 10:48 am
TROUBLESHOOTING
Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are
often easily corrected, and this can save you the trouble of sending your unit off for repair.
Power
Tape Transport (VCR deck)
Playback (VCR deck)
SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION
1. No power is supplied to the unit. ● The AC power cord is disconnected. Connect the AC power cord.
2. The Remote won’t function. ● The batteries are discharged. Replace the dead batteries with new ones.
SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION
1. During recording, the tape does not
run. The counter display blinks on the
front display panel.
● The unit is in the Record Pause mode. Press 4 PLAY to resume recording.
2. The tape will not rewind or fast-
forward.
● The tape is already fully rewound or
fast-forwarded.
Check the cassette.
SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION
1. The VCR deck can not be operated. ● The VCR deck is not selected. On the unit
Press VCR/DVD repeatedly so that the
VHS indicator lights up on the front
display panel.
On the Remote
Press VCR so that the VHS indicator lights
up on the front display panel.
2. The playback picture does not appear
while the tape is running.
● If you are using the RF connection,
— the TV receiver’s channel selector is
not set to the VCR channel.
— the unit’s VCR channel has not been
correctly set.
If you are using the RF connection,
— set the TV receiver to the VCR channel.
— perform “Set the VCR channel.”
(
੬ pg. 13).
● If you are using the AV or Component
Video* connection, the TV receiver is
not set to the AV mode.
* (DVD deck only)
If you are using the AV or Component
Video* connection, set the TV to its AV
mode.
* (DVD deck only)
3. Noise appears during visual search. ● This is normal.
4. Noise appears during normal
playback.
● The automatic tracking mode is
engaged.
Try manual tracking. (
੬ pg. 30)
5. The playback picture is blurred or
interrupted while TV broadcasts are
clear or “USE CLEANING CASSETTE”
message appears on the screen.
● The video heads may be dirty. Use a dry cleaning cassette ECL-3F, or
consult your JVC dealer.
6. Breaks are noticeable in Hi-Fi
soundtrack.
● The automatic tracking mode is
engaged.
Try manual tracking. (
੬ pg. 30)
XVC2829US_01.book Page 65 Wednesday, December 8, 2004 10:48 AM