Filter
Top Products
Masterpage:Right-No-Heading
EN
27
Filename [XVS20EX_07S-VHS.fm]
Page 27 February 10, 2003 1:07 pm
Recording Features
Record One Programme While
Watching Another
If your unit is connected to the TV via the AV connection,
press
TV/VCR
. The unit’s VCR indicator and the TV
broadcast being recorded disappear. Once recording is in
progress, all you need to do is to set the channel controls
on the TV for the station you wish to view.
●
The programme selected with the TV’s channel controls
appears on the TV screen, while the one selected with the
unit’s
PR
buttons is recorded on the tape.
●
If a decoder is connected to the unit (
੬
pg. 68), you can
select a scrambled channel as well with the TV channel
controls.
Instant Timer Recording (ITR)
This easy method lets you record for from 30 minutes to 6 hours
(selectable in 30-min. increments), and shuts the unit off after
recording is finished.
1
Start recording.
Press
7
on the unit.
2
Engage the ITR mode.
Press
7
again. “
⅜
” blinks and “0:30” appears on the
front display panel.
3
Set the recording duration.
If you want to record for more than 30 minutes, press
7
to extend the time. Each press extends recording time by
30 minutes.
NOTE:
You can only perform ITR using the
7
button on the unit’s front
panel.
●
Turn on the TV and select the video channel (or AV
mode).
●
Slide the
TV/S-VHS/DVD
switch to the right.
Accidental erasure prevention
To prevent accidental recording on a recorded cassette,
remove its safety tab. To record on it later, cover the hole
with adhesive tape.
Record safety tab
XVS20EX_01.book Page 27 Monday, February 10, 2003 1:07 PM