Filter
Top Products
Masterpage:Right-No-Heading
EN
67
Filename [XVS20EX_09Editing.fm]
Page 67 February 10, 2003 1:07 pm
Perfect Connections
This is an example of recommended connection if your
TV has two 21-pin AV input (SCART) connectors.
Connect the decoder to the satellite receiver’s connector
if you have a decoder, L-1 IN/OUT connector to TV’s
connector, and L-2 IN/DECODER connector to the
satellite receiver’s connector. Then connect the satellite
receiver and TV.
NOTES:
●
Set “L-2 SELECT” to “A/V”. (
੬
pg. 61)
●
You can use Automatic Satellite Programme Recording
function (
੬
pg. 35) with this connection. (S-VHS deck only)
●
To record a programme via the satellite receiver, select L-2
mode by pressing
AUX
(
number key “0”
) and/or
PR
so that
“L-2” appears on the front display panel. (S-VHS deck only)
●
To receive a scrambled broadcast, descramble the signal with
the decoder connected to the satellite receiver.
●
For details, refer to the instruction manual of the satellite
receiver and decoder.
Outdoor unit
Satellite cable
Satellite receiver
Aerial
TV aerial cable
21-pin SCART
connector
Back of TV
ANTENNA IN
ANTENNA OUT
Aerial
connector
Decoder
Mains outlet
Back of unit
XVS20EX_01.book Page 67 Monday, February 10, 2003 1:07 PM