Filter
Top Products
31
Cursor (3)
Are you sure?
"YES" then key.
"NO"
then key.
MENU
all reset
STATUS DISPLAY
CONTROL LOCK
REMOTE SWITCH
HD SIGNAL MODE
FAN SPEED
WHITE BALANCE
TIMER
SET-UP MENU 1/2
ADJUST:
SELECT:
EXIT:
MENU
: OFF
: OFF
: MODE1
: 1080i
: LOW
Are you sure?
"YES"
then key.
"NO" then key.
MENU
reset
3
Press 3.
The confirmation screen appears.
To cancel the reset, press MENU/EXIT (or MENU on
the Monitor).
4
Press 3 again to reset all the Setup
Menu settings.
5
Press MENU/EXIT (or MENU on the
Monitor) once to exit from the menu
operations.
Resetting All the Menu Settings
You can reset all the Menu settings and adjustments at a time,
except the use time (HOUR METER).
1
On the remote control:
Press VOLUME – while holding MENU/
EXIT to display the Setup Menu.
On the Monitor:
Press 2 while holding MENU to display
the Setup Menu.
2
Press 5/∞ to move the cursor (3) to “all
reset” (on the second page).
• The Setup Menu consists of two pages. If you keep
pressing 5/∞, you can move to the other page from
the current page.
3
Press 3.
The confirmation screen appears.
To cancel the reset, press MENU/EXIT (or MENU on
the Monitor).
4
Press 3 again to reset all the Menu
settings and adjustments.
The power is turned off, then turned on again
automatically.
Confirming the Use Time and Model Information
You can confirm the hours of use and the model information
on the Setup Menu.
This may be necessary when you ask for any service.
1
On the remote control:
Press VOLUME – while holding MENU/
EXIT to display the Setup Menu.
On the Monitor:
Press 2 while holding MENU to display
the Setup Menu.
2
Keep pressing 5/∞ until the second
page of the Setup Menu appears.
• The Setup Menu consists of two pages. If you keep
pressing 5/∞, you can move to the other page from
the current page.
3
Confirm the hour of use and model
information.
• The displayed value for the hours of use is divided by
100. To calculate the actual hours of use, multiply the
displayed value by 100.
4
Press MENU/EXIT (or MENU on the
Monitor) once to exit from the menu
operations.
Notes:
• The value for the hours of use is added by one hour unit. If
you use the monitor within one hour, it will not be added to
the hours of use.
• The period when the monitor is on standby (the power
lamp glows orange) will not be added to the hours of use.
STATUS DISPLAY
CONTROL LOCK
REMOTE SWITCH
HD SIGNAL MODE
FAN SPEED
WHITE BALANCE
TIMER
SET-UP MENU 1/2
ADJUST:
SELECT:
EXIT:
MENU
: OFF
: OFF
: MODE1
: 1080i
: LOW
PIXEL SHIFT
POWER SAVE
COLOR-REVERSE
REFRESH
reset
all reset
HOUR METER x100h
SET-UP MENU 2/2
ADJUST:
SELECT:
EXIT:
MENU
: OFF
: OFF
: 123
MODEL
:GM-X50 Ver. A
CATEGORY
. U
PIXEL SHIFT
POWER SAVE
COLOR-REVERSE
REFRESH
reset
all reset
HOUR METER x100h
SET-UP MENU 2/2
ADJUST:
SELECT:
EXIT:
MENU
: OFF
: OFF
: 123
MODEL
:GM-X50 Ver. A
CATEGORY
. U
Model
Information
Hours of use
22-31_GM_X50[US].p65 04.1.27, 8:38 AM31