Filter
Top Products
14
XV-D2000BK
LET0091-001A
Before Using for the First Time
Connecting the power
cord
When all the connections have been made, insert the power plug into the wall outlet
firmly. The STANDBY indicator lights and the setup is completed.
Warning
• Disconnect the power cord if you are not going to use the player for a long time.
• Disconnect the power cord before cleaning the player.
• Disconnect the power cord before moving it.
• Do not connect or disconnect the power cord with wet hands.
• Do not pull the power cord when disconnecting it, as this may damage the cord
and cause fire, electric shock, or other accidents.
Caution
• Do not damage, remodel, twist, or pull the power cord, as this may cause fire,
electric shock, or other accidents.
• Contact a dealer and get a new power cord if the cord is damaged. A damaged
cord may cause fire, electric shock, or other accidents.
• Do not put anything heavy or this player on the power cord, as this may cause
fire, electric shock, or other accidents.
The battery compartment is located on the back of the remote control unit.
1. Press down on the triangular
mark of the compartment cover,
and pull up the cover to open the
compartment.
2. Place the two accessory R6P
(SUM-3)/AA(15F) batteries in the
remote control according to the
polarity markings (“+” and “–”)
inside the compartment and on
the batteries.
3. Place the cover over the com-
partment, and press down lightly.
Installing batteries in
the remote control unit
XV-2000BK/1E 9/24/97, 1:11 PM14