Filter
Top Products
51
XV-D2000BK
LET0091-001A
Controlling Other Equipment
The remote control unit supplied with the player can control other manufacturers’
TVs, CATV converters and satellite tuners, as well as JVC’s amplifiers/receivers.
When operating the other manufacturers’ components, refer to the manuals supplied
with them. To operate these components with the remote control, first you need to
set the manufacturers’ code for each TV, CATV converter, or satellite tuner.
When using the remote control, make sure that the DVD/TV/CATV selector is set to
the correct position.
Controlling TV
To change the remote control signals for operating another manufacturer’s TV
1. Set the DVD/TV/CATV selector to the “TV” position.
2. Press and hold POWER-TV, then press SET.
Do not release POWER-TV. Keep holding POWER-TV until the next step is
completed.
3. Holding POWER-TV, enter the manufacturer’s code (two digits) using numeric
buttons 1-9, and 0.
See the lists on page 61 to find the manufacturer’s code.
4. Release POWER-TV.
The following buttons can be used for operating the TV (with the DVD/TV/
CATV selector set to “TV” position):
• POWER-TV: Turns the TV on and off.
• CH +/-: Changes the channels.
• TV VOLUME +/-: Adjusts the volume.
• 1-9, 0, 100+(+10): Selects the TV channels. +10 button will function as the
ENTER button if your TV requires pressing ENTER after
selecting a channel number.
• TV/VIDEO: Sets the input mode (either TV or VIDEO).
• 10 (CH RETURN): Returns to the previous channel. (only valid for JVC TVs)
• MUTE: Mutes the TV sound.
Note: Refer also to the manual supplied with your TV.
5. Try to operate your TV by pressing POWER-TV.
If your TV turns on or off, you have entered the correct code.
Note: If there is more than one code listed for your brand of TV, try each one until
the correct one is entered.
CATV/SAT TV
DVD
POWER
SET
CATV/SAT TV
DVD
POWER
123
456
789
10 0
10
+
100+CH RETURN
CATV/SAT TV
DVD
POWER
CATV/SAT TV
DVD
POWER
CATV/SAT TV
DVD
POWER
XV-2000BK/3E 9/24/97, 1:31 PM51