Filter
Top Products
Getting started
14
Getting started
XV-C3SL / LET0213-001A / English
Enabling the S-VIDEO output or the VIDEO output
For your TV connection, you can use either the S-VIDEO output or the VIDEO
output. (You cannot use both outputs at a time.)
When you use the S-VIDEO jack or the VIDEO jack, set the VIDEO OUT SELECT (S-
VIDEO AND VIDEO/RGB) switch on the rear panel to “S-VIDEO AND VIDEO.” Then,
“S-VIDEO” appears on the display window for a few seconds. Note that these
outputs have no relationship to the setting of the Y/C-COMP./RGB switch.
IMPORTANT!
• Note that you must change the switch position while the unit is stopped or the unit power is off (on
standby) with the DVD removed. Otherwise, the changed setting is not effective.
• For your TV connection, you can use either the S-video output or the RGB output from the SCART connector
at a time. When you use the S-video output for your TV, be sure that the SCART connector (VIDEO OUT-AV
connector) is not used.
NOTES
• Connect VIDEO OUT of the unit directly to the video input of your TV. Connecting VIDEO OUT of the unit to
a TV via a VCR may cause a monitor problem when playing back a copy-protected disc.
• Connect the unit to a PAL television. Do not connect the unit to an NTSC television.
S-VIDEO
AND VIDEO
RGB
VCDVD
TITLE TRACK CHAP
A
-
B1
PROGRAM
RANDOM
GROUP
(Display Window)
;9&6/%B(QJERRN3DJH)ULGD\$SULO30