Filter
Top Products
Initial settings
47
English
Initial settings
XV-C3SL / LET0213-001A / English
DOWN MIX
To playback a DVD VIDEO disc recorded with
surround multichannel audio correctly, the DOWN
MIX setting must be properly made according to
your audio system.
Note that this setting affects the output signal from
the AUDIO (both DIGITAL and ANALOG) output
jacks when playing back a DVD VIDEO disc recorded
with surround multichannel audio.
• DOWN MIX is initially set to “Lo/Ro.”
•Lt/Rt
When you enjoy multichannel surround audio by
connecting the unit’s AUDIO output (normally, the
DIGITAL output) to a surround decoder.
•L
0
/R
0
When you enjoy conventional 2-channel stereo
audio by connecting the unit’s AUDIO output to a
stereo amplifier/receiver or television set, or
when you duplicate audio of a DVD VIDEO disc
recorded with surround audio to your MD,
cassette, etc.
COMPRESSION
You can compress the dynamic range of the sound
if needed. Using this function, you can listen to
sound at low volumes easily.
• COMPRESSION is initially set to “ON.”
•ON
Audio is played back with the dynamic range
compressed.
•OFF
Audio is played back as it was recorded.
NOTES
• The unit does not provide the DTS decoding
function.
• When playing a DVD VIDEO or Audio CD disc
with DTS, use a DTS decoder to get correct
signals from your speakers. Never use the
unit’s analog output jacks, which output
incorrect signals that may damage your
speakers.
• If you connect the analog outputs and digital
outputs simultaneously, be sure to select the
source of the amplifier correctly, or set the
level control of the amplifier connected to the
analog outputs to minimum.
NOTES
• The DOWN MIX function does not work when
the 3D PHONIC function is activated.
• The DOWN MIX setting does not affect an
MPEG or Dolby Digital bitstream signal from
DIGITAL OUT.
To enjoy the DOWN MIX effect from DIGITAL
OUT when playing back a disc recorded with
the MPEG multichannel or Dolby Digital format,
set “DIGITAL AUDIO OUTPUT” to “PCM ONLY”
(see page 46).
• When playing back a disc recorded with DTS,
you cannot get the DOWN MIX effect from
both DIGITAL and ANALOG outputs.
DIGITAL AUDIO OUTPUT
STREAM / PCM
Lo / Ro
ON
EXIT
DOWN MIX
COMPRESSION
AUDIO DISPLAY SYSTEM
LANGUAGE
PRESS KEY
NOTES
• The Compression function works only when
playing back a disc recorded with DOLBY
DIGITAL 1CH or 2CH. The setting is not
effective for other discs.
• The Compression function does not work
when the 3D PHONIC function is activated.
• With the digital connection, the
COMPRESSION settings in the AUDIO page of
the preference display are invalid. Settings for
these items must be made from the decoder.
DIGITAL AUDIO OUTPUT
STREAM / PCM
Lo / Ro
ON
EXIT
DOWN MIX
COMPRESSION
AUDIO DISPLAY SYSTEM
LANGUAGE
PRESS KEY
%RG\B(QJIP3DJH:HGQHVGD\0D\$0