Filter
Top Products
Masterpage:Right0
EN 25
Filename [DR-MH30EU_05DVD Operation.fm]
Page 25 Tuesday, 29 June 2004 17:40
BASIC OPERATIONS ON DVD DECK
To play back an MP3/JPEG disc, see “Playback With MP3/WMA/
JPEG Navigation” (੬ pg. 55).
1 Load a disc.
● For details, refer to “Placing A Disc” (੬ pg. 8).
● Pressing 4 also closes the disc tray.
● Playback begins automatically if an auto-playback DVD disc is
loaded.
2 Press DVD so that the DVD lamp lights up on the unit.
3 Press 4 to start playback.
● If you load a DVD disc whose region code does not match the unit,
“REGION CODE ERROR” appears on the TV screen. For details,
refer to “Region Number” (
੬ pg. 6).
● If “CAN NOT PLAY BACK DISC UNDER CURRENT SETTING”
appears on the TV screen, refer to “Parental Lock” (
੬ pg. 34).
● With Video CD/SVCD discs with PBC control or some DVD discs, the
menu display may appear on the TV screen after starting playback. In
this case, select an item which you want to play back from the menu.
Otherwise, the playback cannot go forward. Refer to “Playback
Control (PBC) Function” (
੬ pg. 29) or “Locating A Desired Scene
Using The DVD Menu” (
੬ pg. 26).
● The Library Database Navigation also enables you to search and
select the desired titles. (
੬ pg. 50)
4 Press 9 to pause playback.
● To resume normal playback, press 4.
5 Press 8 to stop playback.
● When a recordable disc is played, playback stops and a programme
received with the unit’s tuner resumes on the TV screen.
● When a playback-only disc is played, playback stops and the still
image at the time you press 8 remains on the TV screen. Pressing 8
again resumes a programme received with the unit’s tuner.
● If x is pressed during playback, playback stops, then the disc tray
opens.
NOTES:
● When the Library Database Navigation screen appears, choose a
thumbnail image of the desired title on the TV screen, then press
SELECT(4) or ENTER. (
੬ pg. 50)
● It is not possible to playback the DVD disc recorded in 96 kHz on
DVD during recording or Live Memory Playback on HDD.
Basic Playback
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
A
TTENTION:
● It takes approximately 30 seconds to read a disc depending on the
type and condition of the disc since this unit is multi-disc
compatible (DVD-RAM, DVD-RW, DVD-R). It may even take
several minutes when a disc is dirty, scratched or warped.
● It may take a few seconds to start playback. This is not a
malfunction.
● Forward/reverse high-speed search and other operations cannot
be performed while playback is stopped.
DVD
8
x
4
9
ENTER
9
DVD
x
8
4
SELECT
CABLE/SAT
DVDTV
DR-MH30EU_00.book Page 25 Tuesday, June 29, 2004 5:41 PM