Filter
Top Products
13
Selecting a Language
The [Language Setting] screen appears when you start up
VR-N1600U/E for the first time. Select the language to use
using the steps below.
1 Select a language
● Use the [2/D] or [10/0/E] button to select a language.
2 Use the [SKIP] button to select [OK], followed by
pressing the [16/ENTER] button
● The AThe system is being set up.B message may
appear depending on the setting, and the system is
automatically rebooted.
Memo :
● Selecting [OK] changes the color of the [OK] characters
from brown to orange.
Automatic Registration of Cameras
After you have started up VR-N1600U/E for the first time and
finished selecting a language, the [Auto Detect] screen
appears.
1 Check to ensure that [Auto Detect] is selected,
followed by pressing the [16/ENTER] button
● The APlease wait...B message appears.
Memo :
● The characters of the selected item switches to orange
color.
2 Check to ensure that the camera is detected
● After the message disappears, a list of detected
cameras is displayed.
● If all the cameras are not detected, press the [Auto
Detect] button again. If doing so does not solve the
problem, check the connection with the cameras and
the IP address of the cameras.
Memo :
● Devices other than the cameras may appear in the list.
Uncheck the boxes of these devices.
3 Swap the order of detected cameras
● Select SORT button using [SKIP] button and press
[16/ENTER] button. The order of detected cameras
can be sorted.
● The different types of sort buttons include the [IP],
[MAC], [CH], [MAKER], and [MODEL] sort buttons.
● Select list using [SKIP] button to select [2/D], [10/0/E].
After selecting camera, press [SKIP]] button to select
[Up], [Down]. When [16/ENTER] is pressed, the order
of cameras will be swapped.
● Deselect the check box of any camera that you are not
using.
Memo :
● The camera in the upper position of list order has the first
priority. Camera number will be registered in the list order.
4 Use the [SKIP] button to select [Entry], followed
by pressing the [16/ENTER] button
● The camera that is automatically detected is registered
in the system.
VR-N1600_Startup_EN_001B.book Page 13 Thursday, August 20, 2009 1:10 PM