Filter
Top Products
15
C Use the [7/B] button to display the camera
D Use the [10/0/E] button to select a camera
E Use the [SKIP] button to select [Settings...], followed
by pressing the [16/ENTER] button
● The [Camera Settings] screen appears.
F Setting the Live Image Display Rate
● Select ASame as recordingB or ASame as speedupB
as the live image display rate in [Live Settings].
● When ASame as speedupB is selected, the [Frame
Rate] specified in [Speedup Settings] is used as the
live image display rate.
● When ASame as recordingB is selected, the [Frame
Rate] specified in [Recording Settings] is used as the
live image display rate.
Memo :
● Use [SKIP] to move between the items.
● Use the [2/D] and [10/0/E] buttons to select the item to
configure.
● To enter numeric characters, press the [SELECT] button
to turn on the light of the [SELECT] indicator. Upon
entering the numeric characters, press the [PTZ/
PRESET] button to turn on the light of the [PTZ/PRESET]
indicator.
G Use the [SKIP] button to select [OK], followed by
pressing the [16/ENTER] button
11 Repeat the procedures 9 for each camera
12 Use the [SKIP] button to select [Close],
followed by pressing the [16/ENTER] button
● Setting is complete and the [Live] screen appears.
● The [REC CONTROL] indicator lights up and recording
starts in the recording control mode.
C
D
Speedup Settings
Recording
Settings
Live Settings
[Live] Screen
VR-N1600_Startup_EN_001B.book Page 15 Thursday, August 20, 2009 1:10 PM