Filter
Top Products
22
2222
22
EnglishEnglishEnglishEnglishEnglishEnglishEnglish
■■
Using the DVD player
and represent disc types.
To turn on the system and TV
From the remote control:
1
Press AUDIO ü
üü
ü to turn power on.
• Pressing ü
üü
ü on the center unit also turns on power.
2
Press TV ü
üü
ü to turn TV on.
• On the TV, select the TV input source to VIDEO (e.g.
VIDEO 1).
• To turn on the other manufacturer’s TV with TV ü, you
need to change the transmittable signal codes beforehand.
See page 55.
Notes:
• When you use Audio CDs, since no screen other than
opening screen is displayed, turning on the TV may not be
required.
• For detailed power on operation including the STANDBY
indicator illumination, see page 17.
To insert a disc
After turning on the system and the TV, insert a disc as follows:
On the center unit:
1
Press OPEN/CLOSE to open the disc cover.
• When the current playback source is DVD, “OPEN”
appears on the display window. On the TV, “OPEN”
message appears on the opening on-screen.
2
Place a disc.
Place a disc with label side up so that it is securely seated.
3
Press OPEN/CLOSE to close the disc cover.
• When the current playback source is DVD, “CLOSE”
appears on the display window. On the TV, “CLOSE”
message appears on the opening on-screen.
• After the disc cover is closed, “READING” appears on the
display window. Then, the disc information is read and, if
the current playback source is DVD, the information is
displayed as described in “Display when a disc is inserted”
on page 23. On the TV, while disc information is reading,
“NOW READING” message appears on the opening on-
screen.
4
Remove the disc after playback has finished.
Press OPEN/CLOSE to open the disc cover.
Then, remove the disc as shown below:
After that, press OPEN/CLOSE to close the disc cover.
CAUTION:
Do not put anything on the disc cover since it slides
back and forth, or opens. Doing so may result in
damage to the unit.
Notes:
• The system can play back DVD, Audio CD, Video CD, CD-
R/CD-RW (audio-formatted) discs only. Do not insert other
disc types.
For details about playable disc types, see page 5.
• When OPEN/CLOSE is pressed to close the disc cover,
playback automatically begins with some discs.
• You can insert a disc while playing other source (FM/AM
or AUX).
• When the disc cover is open, you can directly play the disc
by pressing DVD on the remote control or by selecting
“DVD” with SOURCE on the center unit.
• If the Region Code of the disc does not match your
system, “REGION CODE ERROR!” appears on the
opening on-screen on the TV. This means that you cannot
play the disc.
• When OPEN/CLOSE is pressed in standby mode, the
center unit automatically turns on and the disc cover slides
backwards and opens.
DVD
VCR
DECODE
SUBTITLE
TITLE
AUDIO
TIME
DIGEST
ZOOM
DISPLAY
CHOICEANGLERETURN
SOUND
FM/AM
AUX
AUDIOTV
STANDBY/ON
2
1
OPEN/CLOSE
TH-A9(B).book Page 22 Saturday, February 3, 2001 12:53 PM