Filter
Top Products
36
3636
36
Using the DVD player
Using the DVD playerUsing the DVD player
Using the DVD player
EnglishEnglishEnglishEnglishEnglishEnglishEnglish
Programming the Playing Order
[PROGRAM]
You can play titles or tracks on a disc in the desired order using the
Program function.
❏ While stopped
From the remote control only:
1
Press PLAY MODE.
The on-screen display appears on the TV.
2
Press the 2
22
2/3
33
3 cursors to move the pointer to
[PROGRAM] and press ENTER.
The program table appears under the menu bar (as shown
above).
The PROGRAM indicator appears on the display window.
3
Select the titles or tracks in the desired order
using the number buttons (1~10, +10).
Up to 18 titles or tracks can be programmed. You may select
the same titles or track more than once.
Selecting numbers
Selecting 1~10:
Press the relevant button between 1 and 10.
Selecting 11 or higher:
To select 13: Press +10
=
3 .
To select 24: Press +10
=
+10
=
4.
To select 40: Press +10
=
+ 10
=
+10
=
10.
If you mistakenly select the wrong title or track number press
STOP to delete the entered program.
Then re-select the titles or tracks you wish.
4
Press PLAY to start program play.
When all of the programmed titles or tracks have finished
playback, the center unit stops. Since the program remains,
program playback can be used again.
• You can use repeat playback together with program
playback for DVDs, Audio CDs and Video CDs. Select
REPEAT ALL to repeatedly play back the all programmed
tracks. For details, see page 34.
To turn off the on-screen display
Press PLAY MODE.
To quit program playback and clear the program
Press STOP and then PLAY MODE to display the on-screen on
the TV. Then, press STOP once again. Now, the program is
cleared. Then, press ENTER.
The PROGRAM indicator on the display window goes off.
Turning off the power, switching source, or opening the disc cover
will also clear the program.
To temporarily exit program playback and clear
the program
There are two ways to do this operation:
• While stopped and the on-screen play mode menu is not
displayed on TV, press STOP.
• While stopped, press PLAY MODE to display the on-screen on
the TV. Then, move the pointer to [PROGRAM] and press
ENTER to exit the program playback. Since the program
remains, program playback can be used again.
Notes:
• With some DVD discs, program playback does not work.
• During program playback, you can skip to the next title or
track by pressing
¢
. Also, you can skip back to the
beginning of the current title or track by pressing
4
. (You
cannot skip back to the previous title or track.)
• During program playback, you can see the current title or
track by pressing the PLAY MODE. The current title or
track illuminates in yellow on the on-screen display. (To
turn off the on-screen display, press PLAY MODE again.)
TUNING
UPDOWN
REC
/REW
FF/
PAUSE
STROBEMEMORY
TV/VIDEO
MUTING
F.SEARCHB.SEARCH
PTY SEARCH
EON SELECT
RDS DISPLAY
PTY
-
+PTY
CHANNELTV VOL VOLUME
STOP
VCR
TV
SLEEP
SETTING
TV RETURN FM MODE
100+
RDS
DVD
CONTROL
SUBWOOFER
EFFECT
CENTER
TEST
REAR-R
ENTER
EON
THEATER
POSITION
DSP
MODE
REAR-L
CHOICEANGLERETURN
SOUND
PLAY
PLAY
MODE
1
2
3
4
REPEAT PROGRAM RANDOM
1
7
13
3
2
8
14
3
9
15
4
10
16
5
11
17
6
12
18
REPEAT PROGRAM RANDOM
1
7
13
3
2
8
14
3
9
15
4
10
16
5
11
17
6
12
18
The programmed title/track number is shown
under each program number.
TH-A9(B).book Page 36 Saturday, February 3, 2001 12:53 PM