Filter
Top Products
56
5656
56
Operating Other Manufacturers’ Video Equipment
Operating Other Manufacturers’ Video EquipmentOperating Other Manufacturers’ Video Equipment
Operating Other Manufacturers’ Video Equipment
EnglishEnglishEnglishEnglishEnglishEnglishEnglish
To change the transmittable signals for
operating another manufacturer’s VCR
1
Press and hold VCR .
Keep press until step 3 is finished.
2
Press VCR.
3
Enter manufacturer’s code (2 digits) using
buttons 1 - 9, and 0.
See the list below to find the code.
Examples:
For a JVC product, press 0, then 1.
For a PHILIPS product, press 0, then 5.
4
Release VCR .
Following button can be used for operating the VCR:
VCR : Turns on and off the VCR.
After pressing VCR, you can perform the following
operations on the VCR:
Note:
• Refer to the manual supplied with your VCR.
5
Try to operate your VCR by pressing VCR .
When your VCR turns on or off, you have entered the correct
code.
If there are more than one code listed for your brand
of VCR,
try each one until the correct one is entered.
Manufactures’ codes are subject to change without notice. If
they are changed, this remote control cannot operate the
equipment.
PLAY:
Starts playback.
1
11
1
:
Rewinds a video tape.
¡
¡¡
¡
:
Fast winds a video tape.
STOP:
Stops operation.
PAUSE:
Pauses.
¶
¶¶
¶
REC:
Starts recording or enters recording
pause.
CHANNEL +/– :
Changes the TV channels on the VCR.
1 - 10, 0, 100+ (+10):
Selects the TV channels.
100+ (+10) button will function as
the ENTER button if your VCR
requires pressing ENTER after
selecting a channel number.
Manufacturer Code
JVC 01
AIWA 02, 20
BELL+HOWELL 03, 16
BLAUPUNKT 04
CGM 03, 05, 16
DIGTAL 05
FISHER 03, 16
G.E. 06
GRUNDIG 07
HITACHI 08, 09
LOEWE 10, 11, 05
MAGNAVOX 04, 05
MITSUBISHI 12, 13, 14, 15
NOKIA 16
NORDMENDE 17, 18, 19, 31
ORION 20
PANASONIC 21
PHILIPS 05, 22
PHONOLA 05
SABA 23, 17, 18, 19, 31
SAMSUNG 24, 25
SANYO 03, 16
SHARP 26, 27
SIEMENS 07
SONY 28, 29, 30, 35
TELEFUNKEN 17, 18, 19, 31, 32
TOSHIBA 33
DEAWOO 34
TH-A9(B).book Page 56 Saturday, February 3, 2001 12:53 PM