Filter
Top Products
6 EN
INITIAL SETTINGS
For Customers in the U.S.A.*:
Plug & Play
The Plug & Play function sets the clock and tuner channels
automatically when power is first connected to the VCR. The
antenna cable must be connected for the Plug & Play function.
The time and date can be set automatically from clock setting
data that is transmitted by one of the regular TV broadcast
channels. We call this TV channel the “Host Channel” and it is
a PBS channel in your area.
PLUG & PLAY SETUP
1
Connect the antenna cable to the VCR (੬ pg. 4). Then
connect the VCR’s power plug to an AC outlet. Do not
power on the VCR. The clock and tuner channels will
be set automatically.
NOTES:
●
Auto clock set is performed first. The auto clock set
function scans all the channels received by your VCR
to find the Host Channel and then sets the clock.
"Auto" blinks on the front display panel during Auto
clock set.
●
Auto channel set is performed next. The auto channel
set function scans all the channels that are receivable
by your VCR. It then automatically assigns each
receivable channels to the
CH
5
∞
buttons. It skips
non-receivable channels. During auto channel set the
channel numbers are displayed as they are scanned
and set.
●
When Plug & Play has been completed successfully the
correct time is displayed.
●
If an incorrect time or "– –:– –" appears on the display
panel, see "What To Do If Plug & Play Has Failed" on
next page.
Auto Clock Set/Auto Tuner Set
IMPORTANT
● Don’t press any buttons on the VCR or remote while
Plug & Play is in progress.
● If you perform Plug & Play successfully, there’s no need to
perform the Clock (੬ pg. 9) and Tuner (੬ pg. 12)
procedures. If, however, you want to add or delete
channels, refer to “Add Or Delete A Channel” on page 13.
During Initial Auto Clock Set
"Auto" blinks.
During Auto Channel Set
The channel numbers are displayed
as they are scanned and set.
Plug & Play Completed
The current time (including
AM/PM) is displayed.
● If an incorrect time or "– –:– –" appears on the display panel, see "What To Do If Plug & Play Has Failed" on next page.
* Plug & Play also functions if the VCR is in an area bordering the U.S.A. and can receive the clock setting data of a PBS station
located in the U.S.A.; however, if Plug & Play does not function properly, perform manual clock setting. (੬ pg. 9 and 11)
ATTENTION
If you use a cable box, Plug & Play will not function; set
the clock and tuner channels manually. (੬ pg.9 – 13)