Filter
Top Products
20 EN
Superimpose
This function, switchable between ON and OFF, determines
whether or not operational indicators will appear on screen.
12 3
45
0
6
78 9
•• ••
1
2
4
3
To recall an indication
1 Press OSD.
Ⅲ All indications corresponding to the current status are
displayed for 5 seconds. After that, the counter
information and RECORD/PAUSE if in the Record
Pause mode, are left displayed on the screen.
2 Press OSD again to clear the display.
Ⅲ The RECORD/PAUSE indication is left displayed on
the screen.
CH 125 RECORD
THU 12:00 AM PAUSE
] SP
INDEX-1
COUNT –1:23:45
BE
+++
Tuned-in channel or AUX(iliary) mode
When the channel is changed, the new
channel is displayed on the screen for 5
seconds.
Operation mode
When the operation mode is changed,
the new mode is displayed — RECORD
(5 sec.), PLAY (5 sec.), FF/REW (5 sec.
when engaged from Stop mode),
RECORD/PAUSE (for as long as Pause is
engaged), and ITR *:** (5 sec.).
INDEX indication
Tape speed indication
"Cassette Loaded" mark
When a cassette is loaded, the mark is
displayed for 5 seconds. It blinks when the
VCR's EJECT button is pushed.
Counter reading
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS FUNCTION SET
SCREEN
2
Move the highlight bar (arrow) to "FUNCTION SET" by
pressing CH
5
∞
or PUSH JOG
%
fi
, then press OK or
PUSH JOG .
SELECT SUPERIMPOSE SET
MODE
3
Move the highlight bar
(arrow) to "SUPERIMPOSE"
by pressing CH
5
∞
or
PUSH JOG
%
fi
, then press
OK or PUSH JOG to
select the desired mode:
a– Select "ON" if you want
the superimposed
operational indications
on the TV screen.
b– Select "OFF" if you do not want the superimposed
operational indications on the screen.
RETURN TO NORMAL
SCREEN
4
Press MENU.
%
%
NOTES:
●
If you engage the Record Pause mode, RECORD/PAUSE is
displayed regardless of the Superimpose mode setting.
●
If you select a channel on which no signal is received, the
channel number is displayed regardless of the Superimpose
mode setting.
●
Each time you press
OSD
, the indication on the front display
panel will also change as follows: counter reading
=
channel
number
=
clock time. (Channel number is not displayed
during playback.)
Clock time
Tape position indicator
The superimposed indication on the TV screen tells you what the VCR is doing.
CH
OK
MENU
PLAYBACK AND RECORDING FEATURES (cont.)
MENU
OK
PUSH JOG
OSD
CH
FUNCTION
=VIDEO CALIBRATION ON
PICTURE CONTROL AUTO
AUTO TIMER OFF
=SUPERIMPOSE ON
AUTO SP
=EP TIMER OFF
VIDEO STABILIZER ON
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END