Filter
Top Products
30 EN
EDITING (cont.)
Edit From A
Camcorder Or
Another VCR
You can use a camcorder or another VCR as the player and your
VCR as the recorder.
MAKE CONNECTIONS
1
Connect an AV cable between the camcorder’s or the
playback VCR's VIDEO OUT and AUDIO OUT
connectors and your VCR’s VIDEO IN and AUDIO IN
connectors.
● When using a Hi-Fi camcorder or a Hi-Fi VCR,
connect its AUDIO OUT L connector to the AUDIO
IN connector on your VCR.
LOAD A CASSETTE
2
Insert the cassette to be recorded on into your VCR and
the playback cassette into the camcorder or the
playback VCR.
SELECT "EDIT" FOR PIC-
TURE CONTROL SET MODE
3
Follow the "Picture Control" section on page 19, then
select "EDIT".
NOTE:
When you select "EDIT" to dub tapes, be sure to select
"AUTO" (or "NORM" when "VIDEO CALIBRATION" is
set to "OFF") after you finish dubbing the tapes.
SET RECORDER’S INPUT
MODE
4
Press NUMBER key “0” to set your VCR to F-1.
START PLAYER
5
Set the camcorder or the playback VCR to its play
mode.
NOTE:
If the camcorder or another VCR is equipped with a
superimpose/OSD disable feature then set its superim-
pose or display feature to OFF before pressing play.
START RECORDER
6
Set your VCR to its record mode.
Camcorder
AUDIO IN
12 3
45
0
6
78 9
•• ••
1
2
4
NUMBER "0"
AV cable (not supplied)
VIDEO OUT
AUDIO OUT
or
Player
Another VCR
Player
Recorder Your VCR
VIDEO IN