Filter
Top Products
HOME DVD PLAYER V10M10_IM_EN_08072006
www.jWIN.com
26
GETTING STARTED
About the Digital Setup – Continued
2. DYNAMIC RANGE: Used to lower the volume to avoid an annoying trembling sound
without changing the original tone when the “LINE OUT” option is selected above.
3. DUAL MONO: Used to select the way of the audio output when this unit is connected to a
2-channel audio device.
a. STEREO: Select this option to listen to a sound in the stereo format.
b. MONO L: Select this option to listen to a sound such as the only left-channel
mono sound
c. MONO R: Select this option to listen to a sound as the only right-channel mono
sound.
d. MIX MONO: Select this option to listen to a sound as the mixed (left-and-right
channel) mono sound.
4. EXIT SETUP: Used to exit the setup menu.
HOME DVD PLAYER V10M10_IM_EN_08072006
www.jWIN.com
27
PLAY
X
PAUSE
STOP
FWD
XX
OPEN /
CLOSE
STANDBY
OPERATING WITH A REMOTE CONTROL
[STANDBY] Button
Press the [STANDBY] button to turn on this unit. The main unit must be
connected to the power supply.
[0 – 9, 10+] Buttons
The [0 – 9, 10+] buttons are used to enter the time, title, chapter, or track number in a certain
mode. For the number over 10, use the [10+] button with the single numeric buttons.
[OPEN/CLOSE] Button
To eject the disc tray, press the [OPEN/CLOSE] button. To
close the disc tray, press the [OPEN/CLOSE] again.
[PLAY] Button
Press the [PLAY] button to play back a disc in the stop mode.
Press the [PLAY] button to resume the playback in the pause
mode.
[PAUSE] Button
While playing back a DVD or CD disc, press the [PAUSE] button to
pause. To resume the playback, press the [PLAY] button.
[STOP] Button
While playing back a DVD or CD disc, press the [STOP] button to stop
the playback. It will remember the stop position until the disc is ejected,
the [STOP] button is pressed once more, or the unit is turned off. To resume
the playback at which you stopped, press the [PLAY] button. Press the [STOP] button twice in
the playback mode to completely stop. This unit will not remember the stop position at this time.
[XX] Button
While playing back a DVD or CD disc, press the [XX] button to play back
the video or audio contents fast forward. Each press will change the
playback speed as follows:
XXX2 B XXX4 B XXX8 B XXX20 B XXX2
Press the [PLAY] button to resume the normal playback.