Filter
Top Products
Operating the Receiver
15
Program Listings
(Only in TV and analog radio modes)
• Press this button once again:
The program listings are now displayed on the screen.
The selected program is marked with these <..> characters.
• With these buttons you may step through the program listings or
use these buttons to step through in blocks of ten.
• Press this
button once, to switch over to the selected program. Use
this
button when you wish to exit the program listings and you will be
switched automatically back to the previous program.
• Press this
twice, to return to the selected program and exit the pro-
gram listings.
• Exit the menu without changing the program with this
button.
Tuning a Weak Reception Signal
When the received signal is weak, e.g. spikes (herring-bone patterns) are dis-
played at the picture edges, use the option "Picture Tuning" to improve the picture.
• Press this button and the following window is displayed on the screen:
Tuning a weak
Reception Signal
> ¢¢ ------------------------------------- 00
Use these buttons to improve the picture.
Important The radiated power from the individual transponders (satellite programs) varies, as does the
transponder illumination area. Picture tuning is possible for every program but the new settings are not
saved. i.e. if you change channels you must re-tune.