Filter
Top Products
Receiver operation
15
Switching between TV and radio mode
Your receiver allows you to receive TV programmes, analogue radio programmes
and digital radio (ADR) programmes.
•
After switching on, the receiver is in either the TV mode or the radio mode (de-
pending on the mode at time of switch-off).
•
Press the
key on the remote control to switch between TV- , analogue ra-
dio- and ADR radio modes.
Functional sequence:
TV
→
Analogue Radio → ADR Radio → TV etc.
LED-Display:
P ... R ... A ...
With radio mode the screen is blanked out.
Programme selection Selection of programmes in radio mode is carried out in the same way as for TV
mode.
Analogue radio programmes
Broadcasting of the analogue radio programmes takes place using the recognised
Wegener Panda 1 standard.
Information, such as that for digital ADR radio programmes, is not transmitted in
the case of analogue radio programmes.
The programme name for the analogue radio programmes is entered in the ana-
logue radio setup menu.
Further operation is the same as in the TV mode.
Note The “Analogue radio“ initial setup menu has a setting that allows a continuous on-
screen display of the programme slot. The setting is independent of the setting in
the “TV“ initial setup menu.
Digital radio reception (ADR)
Broadcasting of ADR radio programmes takes place in digital form, i.e. the sound
quality corresponds closely to that of CDs.
With ADR radio programmes, the station name together with a category identifier is
transmitted with the sound signal. Unlike the analogue radio mode, a programme
name does not need to be entered in the case of ADR radio programmes.
With ADR radio programmes, the programme providers can also transmit still fur-
ther information such as radio-text and TTA data.
This is then also displayed on the screen (after approximately 3 seconds).
TTA data =Title, artist, composer, CD number.
Example:
Note The displays and overlays appear only if they are included
in the broadcast from the programme provider.