Filter
Top Products
Receiver operation
19
Operation without remote control
If you happen to have mislaid the remote control handset, you can switch the re-
ceiver on by simultaneously pressing both
keys on the front of the unit.
Using the same method you can switch between operating modes:
“TV”, “Ana-
logue radio”
and
“ADR radio”
.
Displaying programme overview
The unit is assumed to be in normal mode (TV-, or radio mode)
•
Press the
key.
The programme overview appears on the screen.
The currently selected programme is identified by
<..>
.
•
The
keys can be used to single-step through the programme list while the
keys allow paging in steps of 10.
•
Pressing the
key once results in switchover to the marked programme. On
exiting the programme overview with
key, there is a switch back to the pre-
vious programme.
•
Pressing the
key twice results in switchover to the marked programme and
exit from the programme overview.
•
To exit from the menu without selecting a programme press key
.
Info menu
•
Press the
key whilst the programme list is overlaid.
The Info menu appears with instructions for calling up the setup menus for the ini-
tial setup, video and audio setup.
Exit from the menu with keys
,
or
.
Stop-watch
By pressing key you can start a stop-watch. A further pressing of the key
removes the stop-watch from the display again.