Filter
Top Products
Receiver operation
17
Additional functions in ADR mode
The UFD 430 receiver provides the facility for displaying the information that ac-
companies the broadcast, not just in the on-screen menu, but also via the LED dis-
play. Display of TTA data via the LED display is done sequentially, which means
that the data is scrolled.
Thus, in ADR radio mode, you have the option of displaying the TTA data and the
radio-text even without the TV set.
Various settings can be made in this connection.
Call up the TTA data menu:
•
Press the keys:
+
In the first menu entry, the scroll interval time of the TTA data records in the LED
display is set. This is adjustable between 1+5 steps.
In the following lines the TTA data records, which are to be displayed when scroll-
ing in the LED display, can be activated.
•
Selection of menu lines using:
.
Activation or deactivation using
.
•
Save with
(press twice).
•
Exit from the menu with
.
•
To start the automatic data scrolling (of the activated TTA data) in the LED dis-
play, press keys
+ in succession .
•
To display individual activated TTA data records and to terminate the auto-
matic data scrolling, press the
key.
Note:
Only the data records accompanying the broadcast can be displayed.
If both TTA data and radio-text is broadcast, the TTA data for “Album“, “Author“
and “CD No“ is concealed by the radio-text in the OSD menu.
•
Using the keys
+ you can mask out the radio-text. The TTA data is then
revealed.
•
By a further pressing of both keys the radio-text is displayed once again.
Search for ADR radio programmes
If, whilst the receiver is in ADR radio mode, the unit is switched off via the key
on the remote control (into standby), the search for digital ADR radio programmes
is started automatically.
New stations are appended to the existing ADR programme list. You can then use
the “sort (insert)“ function to sort these programmes as desired. The search run
takes approximately 30 minutes.
The receiver switches into standby on completion of the search run.
Note
The automatic search run can be turned off in the initial setup menu.