Filter
Top Products
Installation menu
29
Software update
Attention: You need a PC and a null modem cable to carry out updates!
If new software for your DVB-S receiver should be available, you can
download it from the following homepage:
http://www.kathrein.de/de/sat/news/update.htm
On this homepage, you will also find information and notes on the
software update process via the RS 232 interface on the receiver. You
can order the required null modem cable at our factory service centre
ESC in Grassau, under the following address:
ESC Electronic Service
Chiemgau GmbH
Bahnhofstraße 108
83224 Grassau GERMANY
Tel.: +49 (0)8641 9545-0
Fax.: +49 (0)8641 954535 or 954536
E-Mail: service@esc-kathrein.de
Internet: http://www.esc-kathrein.de
Note: After a software download, you must reset the receiver to the factory
setting. Your old password will no longer be valid after a software
update. You must now enter the universal password (0786).
Find out on page Fehler! Textmarke nicht definiert. how to carry out
the reset to the factory setting.