Filter
Top Products
Audio-Video Receiver KRF-X9992D 75
Troubleshooting
Sound
5. Touch to return to the Setup Preference menu; touch
to return to the previous menu.
There wasn’t any sound recorded on tapes made on my
VCR or tape deck
Check that:
• The audio cables are connected properly for the device.
• Analog has been set as the input type. Digital input cannot be
used as source for recording to analog media (such as VHS or
audio tape). See “Switching to Analog Input” on page␣ 21.
The initial sound is intermittent or non-existent when I
start to play from a Dolby Digital DVD source
• Some DVD players simply have intermittent start-up sound.
• Check that the correct digital cable is being used. The cable
must be a digital coaxial or optical cable. See Chapter One of
the Connections and Setup Guide.
With a Dolby Digital program, the loud sounds aren’t very
loud and the quiet sounds aren’t very quiet
Check that volume extremes are not automatically being bal-
anced. See “Midnight Theatre Function” on page␣ 15 of this
manual.