Filter
Top Products
Audio-Video Receiver KRF-X9992D 77
Troubleshooting
PowerTouch
• Re-enter the setup code for the device. See Chapter Two of the
Connections and Setup Guide.
My PowerTouch is slow to respond—sometimes I have to
press buttons or select commands several times
• If PowerTouch is in sleep mode (the screen is blank), the first
but-ton press “wakes it up”. The second press performs the
action.
• Your PowerTouch supports 2-way communication with the
receiver. If the green light on the front of the receiver is lit,
PowerTouch is receiving information. It cannot transmit your
new command until it is finished receiving information from
the receiver.
My PowerTouch is not responding
• Make sure you are within the operating range for
PowerTouch. See page 5 of this manual.
• Replace the batteries. See Chapter Two of the Connections and
Setup Guide.