Filter
Top Products
HELIX DN9340E/DN9344E Remote Control Software
User Guide
38 of 65
11 Select Helix Serial Port from the Port Type drop down list.
12 The Port Configuration window will now extend to include
additional fields. In this window you will select and
name a Helix Serial Port. Select the appropriate COM port
from the drop down list.
13 Rename the port name by clicking in the Port Name field,
highlighting the existing text and typing in the new port
name, for example, “Serial 01”.
14 Click OK. The new port appears in the
Communications Ports list, under its new name.
15 Assign the port name to the device
by selecting the port and device
from the Communications Ports and List
of Devices, and selecting the port
name in the drop down list.
16 Click OK.
Your system should now be ready for online operation, as described in Section 7.6. Successful HELIX
RCS/unit communication is indicated on the units by the yellow NETWORK LED illuminating.