Filter
Top Products
HELIX DN9340E/DN9344E Remote Control Software
User Guide
59 of 65
To connect Ethernet and non-Ethernet units in an Ethernet/serial system
The PC is connected to the first Ethernet unit using one of the options in Section 7.3. The Ethernet units
are connected together using one of the options in Section 7.2. The last Ethernet unit is connected to a
Lantronix UDS1100 Ethernet-to-serial converter via an Ethernet cable. The Lantronix converter is then
connected to the first non-Ethernet unit via serial RS-485 cabling. All of the non-Ethernet units are
connected together in a daisy-chain configuration using RS-485 cabling.
To set up the Lantronix UDS1100 converter, see Section 9.3.