Filter
Top Products
- 9 -
6.3 Connection to another device
The DVD player can be connected to televisions
which operate with the PAL or NTSC standards. In
this way you can transmit the display onto the tele-
vision screen. If you want to use the DVD player on
a television operating under the NTSC standard you
may have to select the NTSC television standard in
the video settings of the DVD players so called
"OSD Menu" (see chapter 8.4. "Special settings:
TV TYPE")
Video connection to the television
1.Switch off the DVD player and the television.
2.Insert the yellow jack plug of the video cinch
cable in the VIDEO IN/OUT socket 2# of the
DVD player.
3.Insert the cinch plug of the video cinch cable in
the televisions corresponding video input.
Audio connection to the television or to a stereo
system
1.For sound transmissions insert the red jack
plug of the audio cinch cable into the AUDIO
IN/OUT COAX socket 2@ of the DVD player.
2.Insert the white and red cinch plugs of the audio
cinch cable into the corresponding audio input
L/R of the television or stereo system.
In the same way you can also connect the DVD
player with a video or DVD recorder in order to
transmit the DVD players video and audio signals
to these devices.
IB_KH6500_V5557_UK_V2_EN.qxd 21.08.2007 12:34 Uhr Seite 9