Filter
Top Products
- 14 -
SCREEN SAVER
• To activate the screen saver set this function to
ON
. The screen saver will now switch on when
the playback is stopped and no activity takes
place for several minutes.
• To switch the screen saver off set the function to
OFF
.
LAST MEMORY
• Select the setting
ON
to playback a disc from
the previous halted position after removal and re-
insertion.
• with the setting
OFF
disc playback starts from the
beginning.
Note:
When the DVD player is switched off the
saved position is not retained.
SET LAST MEMORY STATESET LAST MEMORY STATESET LAST MEMORY STATE
ONONON
OFFOFFOFF
* * GENERAL SETUP PAGE * ** * GENERAL SETUP PAGE * ** * GENERAL SETUP PAGE * *
TV DISPLAYTV DISPLAYTV DISPLAY
ANGLE MARKANGLE MARKANGLE MARK
OSD LANGUAGEOSD LANGUAGEOSD LANGUAGE
CLOSED CAPTIONSCLOSED CAPTIONSCLOSED CAPTIONS
SCREEN SAVERSCREEN SAVERSCREEN SAVER
LAST MEMORYLAST MEMORYLAST MEMORY
WIDEWIDEWIDE
OFFOFFOFF
ENGENGENG
OFFOFFOFF
ONONON
OFFOFFOFF
ONONON
OFFOFFOFF
SCREEN SAVERSCREEN SAVERSCREEN SAVER
* * GENERAL SETUP PAGE * ** * GENERAL SETUP PAGE * ** * GENERAL SETUP PAGE * *
TV DISPLAYTV DISPLAYTV DISPLAY
ANGLE MARKANGLE MARKANGLE MARK
OSD LANGUAGEOSD LANGUAGEOSD LANGUAGE
CLOSED CAPTIONSCLOSED CAPTIONSCLOSED CAPTIONS
SCREEN SAVERSCREEN SAVERSCREEN SAVER
LAST MEMORYLAST MEMORYLAST MEMORY
WIDEWIDEWIDE
OFFOFFOFF
ENGENGENG
OFFOFFOFF
ONONON
OFFOFFOFF
8.2 DIGITAL AUDIO SETUP PAGE
DIGITAL OUTPUT
Select the input
DIGITAL OUTPUT
to set the SPDIF
audio output signal.
OFF
: Select
OFF
when there is to be no digital
signal output.
PCM
: Select
PCM
(Pulse Code Modulation)
when a connection to a digital
amplifier/receiver exists. Your DVD player
transmits, through the PCM signal, the
same audio formats that are rendered on
the disc. In addition there will be an audio
signal output via the left/right connection.
RAW
: The DVD player outputs the raw data of
the Dolby Digital sound (default setting).
Select the input
LPCM OUTPUT
to set the sampling
frequency for the processing of the raw data.
48 K
: Default setting.
96 K
: Only for DVDs with the corresponding
sampling frequency.
Note:
The
LPCM OUTPUT
function is only available if
you have set the SPDIF audio output signal to
PCM.
* * * * * * DIGITAL AUDIO SETUP PAGEDIGITAL AUDIO SETUP PAGEDIGITAL AUDIO SETUP PAGE * * * * * *
SETUP LPCMSETUP LPCMSETUP LPCM
48 K48 K48 K
96 K96 K96 K
DIGITAL OUTPUTDIGITAL OUTPUTDIGITAL OUTPUT
LPCM OUTPUTLPCM OUTPUTLPCM OUTPUT
PCMPCMPCM
48 K48 K48 K
* * DIGITAL AUDIO SETUP PAGE * ** * DIGITAL AUDIO SETUP PAGE * ** * DIGITAL AUDIO SETUP PAGE * *
SETUP SPDIFSETUP SPDIFSETUP SPDIF
OFFOFFOFF
RAWRAWRAW
PCMPCMPCM
DIGITAL OUTPUTDIGITAL OUTPUTDIGITAL OUTPUT
LPCM OUTPUTLPCM OUTPUTLPCM OUTPUT
RAWRAWRAW
48 K48 K48 K
IB_KH6500_V5557_UK_V2_EN.qxd 21.08.2007 12:34 Uhr Seite 14