Kompernass KH 6500 DVD Player User Manual


 
- 31 -
16. Troubleshooting
Display is blank/DVD player shows no functions
even though it is switched on
A Check to see that the power cord is properly
plugged into the power socket.
B Check to see if the power socket, in which you
have plugged the power cord of the power
supply unit/vehicle adapter, is supplying power
by connecting to it another device. If necessary
plug the power cord of the power supply
unit/vehicle adapter into another power socket.
C Switch off the DVD player by pressing the
"Power" button and wait for ten seconds. Then
switch the DVD player back on by pressing the
"Power" button.
The display shows "No Disc" even though there is
a disc inserted
A The disc is dirty, scratched or damaged.
Clean the disc or insert another disc.
B The Country/Region code on the inserted
DVD/VCD/S-VCD does not correspond to the
Country/Region code of the DVD player. In this
case the DVD/VCD/S-VCD can not be played
back with the DVD player.
Inserted disc will not playback
It is possible that a layer of condensation has built
up on the DVD players laser scan lens. This can
be the case especially if the DVD player has been
subjected to strong temperature fluctuations.
If this is the case place the DVD player in a dry en-
vironment at normal room temperature. First remove
the currently inserted disc from the disc tray. Sub-
sequently allow the DVD player to sit switched on
for at least an hour without using it until the layer
of condensation has dissipated.
No image or Black/White image only
A Check to make sure that all connection cables
between the DVD player and the television
(or Video projector) are firmly inserted into
the corresponding sockets
B Check to make sure that the settings in the
OSD menu match the connections variant, with
which you have connected the DVD player to
the television (or Video projector).
C Check by means of the televisions (or Video
projectors) operating instructions to see if set-
tings to the television (or Video projector) may
be necessary in order to use the DVD player
with the television.
No sound
A Check to see if the DVD player is possibly
switched to mute (MUTE button).
B Check to see that all connecting cables between
the DVD player and potentially connected audio
components are firmly plugged into the corres-
ponding sockets
C Check to make sure that the settings in the
OSD menu match the connections variant, with
which you have connected the audio compo-
nent to the DVD player.
D Check by means of the televisions operating in-
structions to see if settings to the television may
be necessary in order to use the DVD player
with the television.
IB_KH6500_V5557_UK_V2_EN.qxd 21.08.2007 12:34 Uhr Seite 31