Filter
Top Products
63
ENG
ENGLISH
TROUBLESHOOTING
The screen image looks abnormal.
Problem Resolution
Is the screen position wrong?
y
D-Sub analog signal - Press the AUTO button in the remote control to
automatically select the optimal screen status that fits into the current
mode. If adjustment is not satisfactory, use the Position OSD menu.
y
See if the video card resolution and frequency are supported by the
product. If the frequency is out of range, set to the recommended
resolution in the Control Panel Display Setting menu.
Do thin lines appear on the
background screen?
y
D-Sub analog signal - Press the AUTO button in the remote control to
automatically select an optimal screen status that fits into the current
mode. If adjustment is not satisfactory, use the Clock OSD menu.
Horizontal noise appears or the
characters look blurred.
y
D-Sub analog signal - Press the AUTO button in the remote control to
automatically select an optimal screen status that fits into the current
mode. If adjustment is not satisfactory, use the Phase OSD menu.
The screen is displayed
abnormally.
y
The proper input signal is not connected to the signal port. Connect
the signal cable that matches with the source input signal.
After-image appears on the product.
Problem Resolution
After-image appears when the
product is turned off.
y
If you use a fixed image for a long time, the pixels may be damaged
quickly. Use the screen-saver function.
y
When a dark image is displayed on the screen after an image with
high contrast (black and white or gray), this may cause image sticking.
This is normal for LCD screen.