Filter
Top Products
69
8-7. Initializing the System
About Initial Setup
The DIRECTV
®
HD Receiver is capable of receiving three types of signals; ANT, CABLE and DIRECTV
®
programming (if you are a DIRECTV customer). Initial Setup lets you initialize your system to function
properly with your dish antenna.
Setup Wizard
Provides whole sequential process from dish selection (Step 1) to channel setup (Step 5).
Step 1. Dish Setup
As first step, you should select one of three dish setup modes ( Manual Selection / Auto Detection
/No Dish ).
Manual Selection allows you to select the correct dish type among three different types available;
Round Dish for Satellite Network A only, Oval Dish for Satellite Networks A and B, or Oval Dish for
Satellite Networks A, B, and C. For advice on selecting a dish that will provide the services that you
desire, contact DIRECTV (1-800-DIRECTV) or your local DIRECTV retail expert. If you already have a
dish, refer to its user’s guide to determine its type. To receive all available HD programming, you
should install and select the Oval dish type (Oval dish (Sat A, B, C)).
The Auto Detection feature will help you select your dish if you are unsure of your dish type.
If you are not a DIRECTV customer and want to view programming only from Antenna/Cable, then
select the No Dish Mode.
8. CUSTOMIZATION