LG Electronics XBR446 DVD VCR Combo User Manual


 
Before Operation (Continued)
Country Code
Enter the code of a country/area whose standards were
used to rate the DVD video disc, referring to the list
(See “Country Codes”, page 62).
11
Press SETUP.
The Setup menu appears.
22
Use v / V to select the LOCK option.
33
While the LOCK option is selected, press B to
move to the second level.
44
Use v / V to select the “Country Code” option.
55
Press B to move to the third level.
66
When you have not entered a password yet.
Enter a 4-digit password using the numbered but-
tons to create a personal 4-digit security password.
Enter the 4-digit password again.
When you have already entered a password;
Enter a 4-digit password using the numbered but-
tons to confirm the personal 4-digit security pass-
word.
ip
If you enter the wrong number, press b repeatedly to
delete password numbers one by one then correct it.
77
Select the first character using the v / V
buttons.
88
Shift the cursor using B buttons and select the
second character using v / V buttons.
99
Press ENTER to confirm your country code
selection, then press SETUP to exit the menu.
RECORD
Disc Record Mode
You can set the picture quality for DVD recording; XP
(High quality), SP (Standard quality), LP (Low quality),
EP (Extend quality).
11
Press SETUP.
The Setup menu appears.
22
Use v / V to select the RECORD option.
33
While the RECORD option is selected, press B
to move to the second level.
44
Use v / V to select the “Disc Record Mode”
option.
55
Press B to move to the third level.
66
Use v / V to select a desired Disc Record Mode
(XP, SP, LP or EP).
77
Press ENTER to confirm your selection, then
press SETUP to exit the menu.
VCR Record Mode
You can set the picture quality for VCR recording;
SP (Standard Play), SLP (Super Long Play).
DVR HOOKUP
25
Movie Rating
Set Password
Country Code
US
Prev. Select Close
XP
SP
LP
EP
Disc Record Mode
VCR Record Mode
DV Record Audio
Auto Chapter
Prev. Select Close
SLP
SP
Disc Record Mode
VCR Record Mode
DV Record Audio
Auto Chapter
Prev. Select Close