Filter
Top Products
HOOKUP
17
Connections (Continued)
Audio/Video connection
11
Connect the VIDEO OUT jack on the Recorder
Combi Receiver to the video in jack on the TV using
the video cable (V).
22
Connect the Left and Right AUDIO OUT jacks from
the Recorder Combi Receiver to the audio left/right
in jacks from the TV using the audio cables (A).
S-Video connection
11
Connect the S-VIDEO OUT jack on the Recorder
Combi Receiver to the S-Video in jack on the TV
using the S-Video cable (S).
22
Connect the Left and Right AUDIO OUT jacks from
the Recorder Combi Receiver to the audio left/right
in jacks on the TV using the audio cables (A).
Component Video (Color Stream
®
) connection
11
Connect the COMPONENT/PROGRESSIVE SCAN
VIDEO OUT jacks on the Recorder Combi Receiver
to the corresponding in jacks on the TV using an Y
Pb Pr cable (C).
22
Connect the Left and Right AUDIO OUT jacks from
the Recorder Combi Receiver to the audio left/right
in jacks on the TV using the audio cables (A).
Progressive Scan (ColorStream
®
pro) connection
If your television is a high-definition or “digital ready”
television, you may take advantage of the Recorder
Combi Receiver’s progressive scan output for the
highest video resolution possible.
If your TV does not accept the Progressive Scan for-
mat, the picture will appear scrambled if you try
Progressive Scan on the Recorder Combi Receiver.
11
Connect the COMPONENT/PROGRESSIVE SCAN
VIDEO OUT jacks on the Recorder Combi Receiver
to the corresponding in jacks on the TV using an
optional Y Pb Pr cable (C).
22
Connect the Left and Right AUDIO OUT jacks from
the Recorder Combi Receiver to the audio left/right
in jacks on the TV using the supplied audio cables
(A).
otes
Set Progressive Scan option to “ON” in the General
menu, see page 28.
Progressive Scan does not work with the RF,
Audio/Video or S-Video connections.
DVD/VCR
OUT
ANTENNA
INPUT
L
R
Y
Pb
Pr
COMPONENT/PROGRESSIVE VIDEO INPUT
AUDIO INPUT
VIDEO
INPUT
S-VIDEO
INPUT
R
Rear of TV
Rear of Recorder Combi Receiver
S
A
V C
Connecting to a TV
Make one of the following connections, depending on the capabilities of your existing equipment.
RF coaxial connection
Connect the RF.OUT jack on the Recorder Combi Receiver to the antenna in jack on the TV using the 75-ohm
Coaxial Cable supplied (R).
ote
If you use this connection, tune the TV to the Recorder Combi Receiver’s RF output channel (CH 3 or 4).
How to set the Recorder Combi Receiver’s RF output channel
When the
Recorder Combi Receiver
is turned off,
press and hold TRK/PRESET(-/+) (v or V) on the remote control
for about five seconds to change the RF output channel (CH 03 or CH 04). “RF-03” or “RF-04” appears in the dis-
play window.