Filter
Top Products
HOOKUP
27
Before Operation (Continued)
To Add or Erase Channels from Memory
This feature allows you to add to or erase channels
from memory manually.
11
Follow steps 1-3 as shown above to the
previous page (Auto Channel Set).
22
Use v / V to select the CH. Add/Del option.
33
Press B to move to the third level.
“Edit” icon is highlighted.
44
Press ENTER.
The Channel Edit menu appears.
55
Use v / V or number buttons to select a channel
to add or delete then press B.
“Add” or “Delete” icon is highlighted.
66
Press ENTER to confirm your setting.
77
Repeat steps 5-6 to add or erase additional
channels.
88
Press SETUP or RETURN to exit the menu.
Auto Clock Set
The Recorder Combi Receiver gives you two ways to set
the time and date: the Auto Clock Feature or manually.
The Auto Clock Feature enables the Recorder Combi
Receiver to set up the clock when the Recorder Combi
Receiver is turned off.
The Clock Set feature is set to Auto at the factory. In the
“Auto” setting, the Recorder Combi Receiver looks for a
channel carrying XDS (Extended Data Services) infor-
mation. XDS updates the clock using the Coordinated
Universal Time.
11
Press SETUP.
The Setup menu appears.
22
Use v / V to select the GENERAL menu.
33
While the GENERAL menu is selected, press B
to move to the second level.
44
Use v / V to select the “Clock Set” option.
55
Press B to move to the third level.
66
Use v / V to select the “Auto” option then press
ENTER.
The Auto option is set at the factory. In the Auto option,
the Recorder Combi Receiver looks for a channel carrying
XDS (Extended Data Services) information. XDS updates
the clock using the Coordinated Universal Time.
77
Use v / V to choose your “Time Zone”.
You can set your local Time Zone manually. When
Timezone is set to Auto, the Recorder Combi Receiver will
use XDS information to determine the proper setting.
88
Use B to choose the “Daylight Savings” option.
Use v / V to choose Auto, On, or Off.
You can turn Daylight Savings On or Off manually. When
it is set to Auto, the Recorder Combi Receiver will use
XDS information to determine the proper setting.
99
Press ENTER to confirm your setting, then
press SETUP to exit the Setup menu.
ote
If your local TV station does not send date and time informa-
tion, or sends incorrect information, you can
set the clock man-
ually.
Manual Clock Set
11
Follow steps 1-5 as shown above to the left
(Auto Clock Set).
22
Use v / V to select the “Manual” option then
press ENTER.
33
Enter the necessary information for date and
time.
b / B (left/right): Moves the cursor to the previous
or next column.
v / V (up/down): Changes the setting at the current
cursor position.
44
Press ENTER to confirm your setting, then
press SETUP to exit the Setup menu.
Tuning Band
Auto Channel Set
CH. Add/Del
Clock Set
TV Aspect
Progressive Scan
Factory Setting
Time Zone
Manual
Auto
Auto
Daylight
Savings
Auto
Prev. Select Close
Power Save Mode
Tuning Band
Auto Channel Set
CH. Add/Del
Clock Set
TV Aspect
Progressive Scan
Factory Setting
AM
Manual
Auto
Year
Date
Time
12
2005
00
11
/
:
OK
Power Save Mode
Ch. 2
Delete
Add
0-9 Input
Close