Before Operation (Continued)
Disc Finalize
Finalizing ‘fixes’ the recordings in place so that the disc
can be played on a regular DVD player or computer
equipped with a suitable DVD-ROM drive.
Finalizing a Video mode disc creates a menu screen for
navigating the disc. This is accessed by pressing
MENU/LIST or TITLE.
Caution
Once you have finalized a DVD-R and DVD+R
disc, you cannot edit or record anything else on
that disc except DVD+RW. However, you can
record and edit a DVD-RW disc by choosing
Unfinalize.
11
Follow steps 1-3 as shown on page 32 (Disc
Initialize).
22
Use v / V to select the “Disc Finalize” option.
33
Press B to move to the third level.
Finalize is highlighted.
44
Press ENTER.
Finalize menu appears.
55
Use b / B to select OK then press ENTER.
The Recorder Combi Receiver starts finalizing the
disc.
ote
Finalization can take up to 3-4 minutes or more depend-
ing on the type of disc, how much is recorded on the
disc, and the number of titles on the disc.
ips
If you load a DVD-RW that has already been finalized,
you can ‘Unfinalize’ it by choosing Unfinalize from the
Finalize menu. After doing this, you can edit and re-
record onto the disc.
You cannot unfinalize a DVD-R and DVD+R disc.
Disc Protect
When recording in VR mode formatted DVD-RW disc,
set to ON to prevent accidental recording, editing or
erasing of the disc loaded and recording in
DVD+R/+RW disc, set to ON to prevent accidental over-
write recording, clean-up recording, editing or erasing of
the disc loaded.
If you need to unlock the disc to make edits, select
OFF.
AutoPlay
When you load a DVD with AutoPlay turned on, the
Recorder Combi Receiver will bypass the Disc menu
and
trailers and start playing the movie automatically.
Set “AutoPlay” to ON or OFF.
HOOKUP
33
