Filter
Top Products
DV Record Audio
You need to set this if you have a camcorder using
32kHz/12-bit sound connected to the front panel DV IN
jack.
Some digital camcorders have two stereo tracks for
audio. One is recorded at the time of shooting; the other
is for overdubbing after shooting.
On the Audio 1 setting, the sound that was recorded
while shooting is used.
On the Audio 2 setting, the overdubbed sound is used.
Auto Chapter
During recording, chapter markers are added automati-
cally at fixed intervals. You can set this interval to 5 min-
utes or 10 minutes. To turn off automatic chapter mark-
ing, select “None”.
DISC
Disc Initialize
If you load a completely blank disc, the recorder will ini-
tialize the disc.
DVD-R: The recorder initialize the disc to Video mode.
The recording mode will always be Video mode.
DVD-RW: The Initialize menu will appear. Select “VR
Mode” or “Video Mode” then press ENTER.
DVD+R: The Initialize menu will appears. Select “Yes”
then press ENTER.
DVD+RW: The recorder initialize the disc to DVD+RW
mode.
Also, you can format the disc from the Setup menu as
below.
11
Press SETUP.
The Setup menu appears.
22
Use v / V to select the DISC option.
33
While the DISC option is selected, press B to
move to the second level.
44
Use v / V to select the “Disc Initialize” option.
55
Press B to move to the third level.
“Start” icon is highlighted.
66
Press ENTER.
Disc Initialize menu appears.
77
In case of DVD-RW, use b / B to select a desired
Disc Initialize Mode (VR Mode or Video Mode)
then press ENTER.
In case of DVD+RW, go to step 8.
88
Use b / B to select “OK”, and press ENTER.
It takes a few moments to format the disc.
Caution
If you want to change the disc format, everything
recorded on the disc will be erased.
32
Before Operation (Continued)
Audio 2
Audio 1
Disc Record Mode
VCR Record Mode
DV Record Audio
Auto Chapter
Prev. Select Close
5 Min
10 Min
None
Disc Record Mode
VCR Record Mode
DV Record Audio
Auto Chapter
Prev. Select Close
Start
Disc Initialize
Disc Finalize
Disc Label
Disc Protect
AutoPlay
Prev. Select Close
Video Mode
Select a mode.
Disc Initialize
VR Mode
Cancel
All data on the disc will be deleted.
Proceed?
Disc Initialize
OK