Filter
Top Products
Option Menu Features (Continued)
26
Audio Output
Sets the HDTV Receiver’s Digital Audio Output according to the type of audio
system you use.
ote
Audio Output setting is available only for digital broadcast, an analog broadcast is out-
put only in PCM.
11
Press MENU to display the on-screen menu.
22
Select the OPTION menu using
33
/
44
then press (SELECT) or
22
.
33
Select the Audio Output option using
33
/
44
then press
(SELECT) or
22
.
44
Select the desired audio output using
33
/
44
then press
(SELECT).
Dolby Digital: Select “Dolby Digital” if you connected the HDTV
Receiver’s DIGITAL OUT jack to a Dolby Digital Decoder (or an
Amplifier or other equipment with a Dolby Digital Decoder).
PCM: Select if the HDTV Receiver’s DIGITAL OUT jack is connected
to a 2-channel Digital Stereo Amplifier.
55
Press MENU to return to the previous menu or press EXIT on the
Remote Control to return to TV viewing.
Audio Variable
If the audio variable menu is set to On, audio volume can be increased/
decreased by pressing VOL (+/–) on the Remote Control or
11
/
22
on the
front panel. If set to Off, audio volume can not be controlled by the HDTV
receiver.
11
Follow Steps 1-2 as above (Audio Output).
22
Select Audio Variable using
33
/
44
then press (SELECT) or
22
.
33
Select an Audio Variable option (On or Off) using
33
/
44
then press
(SELECT).
44
Press MENU to return to the previous menu or press EXIT on the
Remote Control to return to TV viewing.
ote
Before setting Audio Variable to Off, make sure that you have turned down the TV’s
volume to the minimum. Otherwise, sudden high volume sound may cause hearing or
speaker damage.