Filter
Top Products
9
INTRODUCTION
Connection Panel Overview
Do not touch the inner pins of the
jacks on the rear panel.
Electrostatic discharge may cause
permanent damage to the unit.
AC Power Cord
Plug into the power source.
ANT LOOP OUT
RF output to TV’s “Antenna In” jack or other devices.
OPTICAL (Digital audio out jack)
Connect to digital (optical) audio equipment.
COAXIAL (Digital audio out jack)
Connect to digital (coaxial) audio equipment.
VIDEO OUT (MONITOR OUT)
Connect to a TV/Monitor with Video inputs.
COMPONENT VIDEO OUT
Connect to a TV/Monitor with YPbPr inputs.
AUTHORIZED SERVICE ONLY
Reserved for authorized service purposes.
ANT IN
Connect to HDTV signal source; over-the-air antenna or cable service.
S-VIDEO OUT
Connect to a TV/Monitor with S-Video inputs.
DVI OUT
Connect to a TV with a DVI connector.
Variable AUDIO OUT (Left/Right)
Connect to a TV, Amplifier, Receiver or Stereo System.
RGB OUT
Connect to a TV with RGB inputs.
ote
Your HDTV Receiver can be connected to use a TV as the viewing device. Since the
receiver has a built-in tuner, a monitor can be used instead for the viewing device.