Filter
Top Products
INTRODUCTION
7
Remote Control Key Functions
STB
GUIDE
GUIDE
STB
MODE
TV/INPUT
AUDIO CC SIGNAL
SELECT
ez ADD
*
POWER
TV VCR DVD AUX
FLASHBK MUTE
RATIO
PROGRAM
STATION
FREEZE SURF HELP
PG DN
PG DN
PG UP
PG UP
STB
Sets Remote Control to operate
the HDTV
Receiver
.
TV/INPUT
Selects the TV’s source (Tuner or AUX
A/V input).
ez ADD
Automatically adds new channels (digital)
available through the antenna input
except channels memorized and already
in the channel list.
Numbers
Chooses channels and enters program-
ming information.
Dash (-)
Enters a channel number for multiple pro-
gram channels such as 2-1, 2-2, etc.
MUTE
Turns sound ON and OFF.
VOL (Volume) (+/–)
Sets sound level.
CH (Channel) (+/–), PG UP/DN
Selects channels in memory. Pressing the
PG UP/DN buttons pages through the
Program Guide or Channel Edit menu.
FLASHBK
Returns to the last channel viewed.
PROGRAM
Brings up the Program Guide.
STATION
Brings up the Station Guide.
DATE
Changes the date of the Program or
Station Guide when the Program or
Station Guide is displayed.
INFO
Shows the current station and program
information on the screen.
MENU
Accesses or closes main menu.
Component Control Buttons
Provides control for DVD players, VCRs,
and similar components.
Mode Indicator
Flashes with key presses to indicate
mode.
MODE
Selects Remote Control operational mode.
POWER
Turns the HDTV Receiver ON and OFF.
This button is not functional.
AUDIO
Selects program’s audio language or
analog audio options if available.
CC
Selects caption mode if available.
SIGNAL
Shows the signal strength of the current
channel.
SELECT ( )
Completes the channel number input and
promptly tunes to selected channel.
RATIO
Changes the picture aspect ratio.
FREEZE
Freezes the current image. Pressing the
button again returns the image to live
video.
SURF ( )
Tunes to your surf channels or to scan the
guide.
HELP (?)
You can see the help description of a
menu option while that menu is displayed
by pressing the HELP (?) button.
Arrow Buttons (
33
/
44
/
11
/
22
)
Selects options in a menu.
SELECT ( )
Completes the channel number input and
promptly tunes to selected channel.
EXIT
Removes all on-screen displays and
returns to TV viewing from any menu.
Remote Control Operation Range
Point the Remote Control at the remote sensor and
press the buttons.
Distance: About 23 ft (7 m) from the front of the
remote sensor.
Angle: About 30° in each direction of the front of the
remote sensor.
Remote Control Battery Installation
Remove the battery cover on the rear of the Remote
Control, and insert two batteries (size AA) with and
matched correctly. Reinstall cover.
Caution
Do not mix old and new batteries. Never mix different
types of batteries (standard, alkaline, etc.).