Filter
Top Products
12
Call up the “TV Menu” with
the MENU button.
Select the line “Channels”.
Call up the menu
“Channels” with the OK
button.
Select the line “Sort”.
Call up the menu “Sort”
with the OK button.
The channel preview is displayed in the “Sort”
menu.
Select the name of the channel
that you want to move.
Tap the blue button.
Move the channel name to the
desired channel number. The
channel name that was next to
this number moves down a
position.
End the procedure by tapping
the blue button again.
If other channels are to be sorted, repeat the
operating steps.
Deleting Channels
You can delete a channel from the channel
preview, for example, if it has been saved twice.
Select the name of the channel
that you want to delete.
Tap the red button.
All the other channels will move
up a position.
Reserving/Inserting
Channel Position
Select a channel number.
A position is reserved by
pressing the yellow button.
All the subsequent channels will
move down a position.
Sort radio programmes
Radio programmes as well as TV programmes
can be sorted, added or deleted.
Call up the Radio menu:
Press the button on the remote
control…
the ”radio operation ” menu is
displayed
Press the MENU button
Select the ”Radio programmes ”
line and confirm with OK
Select the ”Sort” line and
confirm with OK.
Proceed as described in ”Sort, delete TV
programmes or insert programme location”.
First installation
–For ”Sound carrier 1” you would
normally select a frequency of 7.02 Mhz for
the stereo sound.
–For ”Mode 1” you can set stereo or mono
with various bandwidths. If you are entering
a setting for Mono M110 for example, you
can use ”Mode 2” to select another
bandwidth for the channel.
– If everything is set correctly, you can start
programming, by selecting the ”Carry out
search” line and confirming with the OK
button.
Caution
The settings are valid for all programmes of
the satellite that are searched for and
saved. As these programmes may be
transmitted with different video parameters
and sound carriers, some programmes
settings may need to be adjusted after the
automatic search and save.
These corrections can be made
subsequently in the ”Manual setting ”
menu.
Sorting channels
You can alter the sequence of channels.
OK
M
E
TV menu
Back
End
Standard settings
Picture
Sound
Programmes
AV connections
Child lock
Other ...
OK
M
E
Programmes
Back
End
Automatic search
Manual adjustment
Sort
Cancel programme range
Enter/change name
Decoder programmes
OK
OK
OK
OK
MENU
OK
OK
LCD_SAT_31715022_GB 10.08.2004, 15:44 Uhr12