Filter
Top Products
28
Select the line
“Frequency” and ...
enter the numbers, if known.
You can also start a channel or
frequency search by pressing
the blue button.
The search function stops when a channel is
found. If the channel transmits Teletext, then
the programme name is also displayed.
Restart the search function with the blue
button, until the required channel is found in
the selected satellite range (Sat/V or Sat/H) or
in the Low/High Band.
Note: only transmitters with the selected
”colour standard ” e.g. PAL are displayed
correctly.
If you wish to search for channels of another
standard, you must first select the appropriate
colour standard and then start the search
function.
If the channel also transmits Teletext, then the
programme name is automatically displayed.
If the sound or picture are faulty, further
adjustment must be made.
Sound settings:
Some transmitters transmit several languages
or additional radio programmes on various
sound carrier frequencies.
If you hear two languages on TV a programme
or hissing on a radio programme, then change
the sound parameters, e.g. from stereo to mono
(M110...).
Manual setting
This setting allows you to change programmes
that have already been stored, or to search for
new programmes and insert them into the
programme overview and save. This assumes
that you know the transmission procedures of
the channel.
The following functions can be carried out:
1. Select satellites.
2. Select satellite range (H = Horizontal/V =
Vertical).
3. Directly input a transmitter frequency.
4. Input programme name.
5. Select colour standard.
6. Set sound carrier frequency.
7. Select bandwidth for stereo/mono sound
mode.
8. Set video parameters.
Calling up “Set Manually” menu:
Press button MENU.
Select the line “Programmes”.
Confirm with OK.
Select the line “Setting
manually”.
Confirm with OK.
Select the “Range” in which
you want to search for a
broadcasting station.
Manual setting of TV programmes
OK
M
E
Manual adjustment
Back
End
Sound carrier
Video parameters
Store
Other ...
Sat ASTRA Hotbird
OK
M
E
Sound carrier
Back
End
Mode 1 M110
Sound 1 ... 7.20 7.38 7.56 ...
Mode 2 M110
Sound 2 7.02
Store
0-9: Input
OK
M
E
Sound carrier
Back
End
Mode 1 Stereo M110 M280 ...
Sound 1 7,02
Mode 2 M110
Sound 2 7,20
Store
• In the ”Manual settings” menu
Select the ”Sound carrier” line.
•For transmission with two or more
languages, e.g. EUROSPORT, use ”Mode 1”
to set ”Stereo” to e.g. ”M110”, or change
to another bandwidth according to the
programme.
Note: If stereo is set using ”Mode 1”, then
this setting is automatically used by ”Mode 2”.
•For another language select the ”sound 1”
line and then select the corresponding
carrier frequency, e.g. 7.38 MHz, using the
left/right arrow buttons on the remote
control.
MENU
OK
OK
OK
OK
OK
OK
AV
wxyz
LCD_SAT_31715022_GB 10.08.2004, 15:44 Uhr28