Filter
Top Products
System Setup Controls
30
NETWORK SUBMENU
The information in the Network submenu
allows users to remotely access the DVR.
ENABLE – Set Enable to YES to remotely
connect to the DVR over a network connection.
If this option is set to NO, remote access to the
system will be disabled.
LOCAL IP MENU – The Local IP menu
contains the IP Address and other networking
information.
• IP TYPE – The IP Type determines
how the Network Information is entered
into the DVR. There are three network
connection types:
o DHCP – The network
automatically leases the
information to the DVR
o Static – Enter the information
manually based on the
connected network
o PPPOE – Enter the information
manually based on the
PPPOE Network Settings.
DHCP SETUP
NOTE: The Local Network will lease the
information to the DVR. The user is not
required to complete these fields.
• IP Type: DHCP
• The information for the IP Address,
Gateway and Net Mask will be
automatically provided by the Local
Area Network.
STATIC SETUP
NOTE: Gather the Network Information from
the Network Router prior to changing these
settings.
• IP Type: Static
• IP Address: Enter an IP address that
is not currently in use on the local
network.
• Gateway: Enter the Gateway for the
local network.
• Net Mask: Enter the Subnet Mask
information for the local network.