Filter
Top Products
Appendix #5 – Network Connectivity Overview
67
ENG
Appendix #5 – Network Connectivity Overview
The DVR can be remotely controlled using your existing network and the provided software.
1. Connect the DVR to the Router using an Ethernet Cable. Power the DVR on.
NOTE: The DVR must be connected to the router prior to powering on the system. This allows the DVR to
communicate on your network
2. Find the IP address of your DVR through the Menu System on the unit. See the Menu section of this
manual for additional System Settings.
3. Set up a web account at http://DDNS.strategicvista.net
4. Enable PORT FORWARDING on your Router.
5. Run the EXE file from the Software CD provided with your system. See the Software Section of this
manual for details on Software setup.
DVR
PC ROUTER
INTERNET