Filter
Top Products
067392-++2137438 45 ,-+/+.
27
Recording Set
Motion Recording
1. CH1 - CH4: Lists all available cameras for configuration. Press the K and L buttons to highlight,
and press the
mo buttons to select the FPS or Quality for each CH. Use theK and L buttons
to change the settings, and press SEL to accept the changes:
• FPS: A set number of Frames Per Second (total) is divided between all available cameras
based on Resolution settings.:
• QUALITY: Set the quality level for
the recording - High, Mid or Low.
2. POST MOTION DURATION: Set the duration that the alarm will continue once detected: 5, 30,
60, 90, 120, 150, 180, 210 or 240 seconds.
3. SETUP MOTION: Configuration for each Motion Sensor enabled Camera Press the
K and L
buttons to highlight the Setup Motion option, and press the SEL button to access the SETUP
MOTION submenu. Press the K and L buttons to highlight a specific Camera, and press the
SEL button to select.
• AREA: Press the SEL button on the AREA option to specify segments of the Camera view
to have Motion Detection. Use the
KLIJ buttons to
navigate around the Motion Setup screen, and press
the SEL button to turn a segment ON/OFF. Press the
MENU button once complete. Dark Blue indicates that
a section has been selected for motion detection, and
blank areas indicate that motion will not be detected
in those areas.
• SENSE: Sets the Sensitivity of the Motion Detection:
Use the
I and J and SEL buttons to change the
setting to High, Mid or Low.
4. SAVE & EXIT: Saves any changes made, and exits to the Main Menu. Press the
K and L buttons
to highlight, and press the SEL button to accept the changes.