LOREX Technology L400 DVR User Manual


 
067392-++2137438 45 ,-+/+.
45
Network Connectivity
Network Connectivity
The DVR unit can be controlled using your existing network and a PC. The DVR Unit can be con-
trolled from within your network, or can also be controlled remotely through the Internet.
DVR
ROUTER
(Not Included)
PC
(Not Included)
INTERNET
1. Connect the DVR to the Router
Power the Observation unit on.
NOTE: It is recommended that the
DVR be connected to the router prior
to powering on the system.
The DVR can be automatically
assigned an IP address by the router
(and other network related settings),
or an IP address can be manually
assigned within the MENU -
NETWORK setup on Page #.
2. Enable PORT FORWARDING on
your Router. Refer to the
instructions on Page 37 for details.
3. Set up a web account at http://
DDNS.strategicvista.net. Refer to
Pages # for setup and configuration
instructions.
4. Access the DVR Software with
either a Local PC or Remote PC
using Microsoft Internet Explorer 5
(or higher). See Pages # for details.
NOTE: Microsoft IE is the ONLY
supported browser at this time.