Filter
Top Products
067392-++2137438 45 ,-+/+.
34
System Set
PTZ Menu
Pan / Tilt / Zoom control (for Pelco D or Pelco P Model Cameras only)
1. PAN / TILT / ZOOM: Accesses the PTZ Control for a
camera. Press the
K and L buttons to highlight, and
press the SEL button to access PTZ controls:
• LEFT/RIGHT - Pans the camera LEFT/RIGHT
• UP/DOWN - Tilts the camera UP/DOWN
• VOL UP/DOWN - Zooms the camera IN/OUT
• SEL/MENU - Stops viewing / Exits viewing
2. FOCUS: Accesses the Focus Control for a camera.
Press the
K and L buttons to highlight, and press the
SEL button to access FOCUS controls:
• LEFT/RIGHT - Pans the camera LEFT/RIGHT
• UP/DOWN - Tilts the camera UP/DOWN
3. SETUP: Setup of the PTZ Cameras. Press the
K and L buttons to highlight, and press the SEL
button to enter the SETUP menu:
• CHANNEL: Select the PTZ camera location (Channel 1-4,
1-8, or 1-16 depending on model)
• ID: Set the camera ID to YES/NO
• Protocol: Select the PTZ Protocol (PELCO-D or PELCO-P)
• Baud Rate: Select the Baud Rate for the Camera (2400,
4800 or 9600 BPS)
• SAVE & EXIT: Saves any changes, and exits to the previous
menu.
4. SAVE & EXIT: Saves any changes made, and exits to the Main Menu. Press the
K and L buttons
to highlight, and press the SEL button to accept the changes.
PTZ (enter Password)
Pan/Tilt/Zoom
Focus
Setup
Save & Exit
Channel
ID
Protocol
Baud Rate
Save & Exit
1
NO
PELCO-D
2400 BPS