Filter
Top Products
QLR0440 SERIES QSG_EN_R3
Page 1
Hardware Installation
STEP 1
For detailed setup information,
please refer to your User’s manual.
NOTE: Please turn off the computer’s power prior to installing the QLR Capture Card. If you are unfamiliar
with installing PC hardware, it is recommended to have a PC technician perform the installation.
1. Using a screw driver remove the
screws from the cover of your
computer.
2. The picture shown is of a computer
with its cover removed.
3. Insert the PCI Capture card into an
available expansion slot.
4. Secure the PCI Card by tightening the
screw with a screw driver.
5. Slide the computer cover back on
and secure it with screws using a
screw driver.
Congratulations!
You have completed Step 1
successfully. Your computer
can now support up to 4
cameras.