Filter
Top Products
28
Recording Functions
Recording Functions
The SC325000 DVR has 4 available recording types: Manual, Schedule, Motion or Sensor.
• Motion: Recording starts when Motion is detected from a Camera input. Motion Recording is
configured through the Motion Menu options. Refer to Page 21 for more details.
• Sensor: Recording starts when the system detects a Sensor Input at the Alarm Block (i.e.
Door Sensor, Window Sensor or Independent Motion Sensor). When an input is detected on
the Alarm Block, recording will begin on the corresponding Camera Channel. Sensor
Recording is configured through the Sensor Menu options. Refer to Page 21 for more details.
• Schedule: Recording starts at a specific date and time. Scheduled Recording is configured
through the Schedule Menu options. Refer to Page 20 for more details.
• Manual: Recording starts when the REC button is pressed.
Each of these events has a Priority level. This means that one type of event recording will take
priority over another:
• Sensor Event: Highest Priority
• Motion and Manual: Middle Priority
• Schedule: Low Priority.
For example, if the DVR is in Scheduled Recording mode and Motion is detected on a Camera
Input, the Scheduled Recording will stop and Recording will start on the Motion Detection Input
(Camera).
: Indicates the Channel is being
Recorded
E-REC: Indicates that Recording
is occurring in EACH mode
(QUAD mode recording is
indicated by Q-REC)