Filter
Top Products
34
Network Connectivity
Network Connectivity
The SC325000 DVR can be remotely controlled using your existing network and the provided
NetViewer software.
DVR
ROUTER
(Not Included)
PC
(Not Included)
INTERNET
1. Connect the DVR to the Router
using the supplied Ethernet Cable.
Power the Observation unit on.
NOTE: The DVR must be connected
to the router prior to powering on the
system. This allows the system to
communicate on your network
2. Set up a web account at http://
dips.dipserv.com/. Refer to the
NetViewer Manual for setup and
configuration instructions.
3. Install the NetViewer software on
your PC. Refer to the provided
‘NetViewer Guide’ with your
product for details on using the
software.
4. Find the IP address of your
Observation using the Lorex IPEdit
application. See Page 36 for details
5. Enable PORT FORWARDING on
your Router. Refer to the
instructions on Page 37 for details.